Header Notice

Winter is here! Check out the winter wonderlands at these 5 amazing winter destinations in Montana

How To Install Kustom Kaddy Cup Holder On Harley

Published:

Modified: December 28, 2023

by Biddy Shell

how-to-install-kustom-kaddy-cup-holder-on-harley

Introduction

Welcome to our guide on how to install the Kustom Kaddy Cup Holder on your Harley motorcycle. If you’re a rider who enjoys long trips or simply cannot go without your favorite beverage by your side, a cup holder is a vital accessory to have. The Kustom Kaddy Cup Holder is specifically designed to provide a secure and convenient solution for holding your drinks while on the road.

 

In this guide, we will walk you through the step-by-step process of installing the Kustom Kaddy Cup Holder on your Harley motorcycle. Whether you are an experienced DIYer or new to motorcycle modifications, with the right tools and instructions, you can easily install this cup holder and enjoy your favorite beverage during your rides.

 

Before we begin, it is important to note that the installation process may vary slightly depending on the specific model of your Harley motorcycle. Therefore, it is recommended to consult the instruction manual provided by Kustom Kaddy Cup Holder for any specific guidance pertaining to your model.

 

Now, let’s gather the necessary tools and materials and get started on installing your Kustom Kaddy Cup Holder on your Harley motorcycle.

 

Tools and Materials Needed

Before you begin the installation process, make sure you have the following tools and materials ready:

  1. Phillips head screwdriver
  2. Allen wrench set
  3. Adjustable wrench
  4. Cup holder bracket
  5. Cup holder
  6. Mounting hardware
  7. Threadlocker (optional)

Most of these tools should be available in a basic toolkit. If you don’t have them on hand, consider borrowing or purchasing them before proceeding with the installation.

 

Additionally, it’s a good idea to have a clean cloth or towel nearby to wipe down any surfaces that may get dirty during the installation process.

 

Now that you have all the necessary tools and materials, let’s move on to the step-by-step installation process for the Kustom Kaddy Cup Holder on your Harley motorcycle.

 

Step 1: Preparing the cup holder and the motorcycle

The first step in installing the Kustom Kaddy Cup Holder is to prepare both the cup holder itself and your Harley motorcycle for the installation process. Follow these instructions:

  1. Take the cup holder bracket and attach it to the handlebars of your motorcycle. The placement of the bracket may vary depending on your preference and the design of your motorcycle. Ensure that the cup holder will be within easy reach and won’t obstruct your view of the road.
  2. Use the adjustable wrench and securely tighten any bolts or screws on the bracket to ensure a stable and secure installation. Check for any loose components and tighten them as needed.
  3. Next, prepare the cup holder by removing any protective coverings or packaging. Inspect the cup holder for any defects or damage. If everything looks good, proceed to the next step.
  4. If desired, apply a small amount of threadlocker to the mounting screws or bolts on the cup holder bracket. This will provide extra security and help prevent loosening due to vibration while riding.
  5. Now, take a moment to clean the area on the motorcycle’s handlebars where the cup holder will be attached. Use a clean cloth or towel to remove any dirt, dust, or residue.

With both the cup holder and the motorcycle prepared, we can now move on to mounting the cup holder bracket on your Harley motorcycle. Follow the steps in the next section to continue the installation process.

 

Step 2: Mounting the cup holder bracket

Now that you have prepared the cup holder and the motorcycle, it’s time to mount the cup holder bracket. Follow these steps:

  1. Align the cup holder bracket with the desired position on the handlebars of your motorcycle.
  2. Using the appropriate tool, tighten the bolts or screws on the bracket to secure it in place. Make sure the bracket is snug and doesn’t move when pressure is applied.
  3. Double-check the alignment of the bracket to ensure the cup holder will be in a convenient and accessible position while riding.
  4. If necessary, adjust the angle of the cup holder bracket to your liking. Many brackets have adjustable angles to accommodate different preferences.

Once you have mounted the cup holder bracket securely, you are ready to proceed to the next step of attaching the cup holder itself. Follow the instructions in the next section to complete the installation process.

 

Step 3: Attaching the cup holder to the bracket

With the cup holder bracket securely mounted on your Harley motorcycle, it’s time to attach the cup holder itself. Follow these steps:

  1. Take the cup holder and position it over the bracket, ensuring that the mounting holes on the cup holder align with the corresponding holes on the bracket.
  2. Insert the mounting screws or bolts through the holes on the cup holder and into the bracket. Use the appropriate tool to tighten them securely, but be careful not to overtighten and risk damaging the cup holder.
  3. Gently wiggle the cup holder to ensure it is securely attached to the bracket. If there is any loosening or movement, tighten the mounting screws or bolts as needed.
  4. Double-check the alignment and positioning of the cup holder. Make any necessary adjustments to ensure it is in a comfortable and accessible location for you while riding.

Now that you have successfully attached the cup holder to the bracket, congratulations on completing the main installation process! However, we still have one more step to go – final adjustments and testing. Continue reading to learn how to finalize the installation and ensure everything is in order.

 

Step 4: Final Adjustments and Testing

Before you hit the road with your newly installed cup holder, it’s important to make final adjustments and perform some testing. Follow these steps:

  1. Check the stability of the cup holder by giving it a gentle shake. Ensure that it is securely attached to the bracket and does not wobble or move excessively.
  2. Take a moment to adjust the angle of the cup holder if necessary. Most cup holders have a swivel or adjustable mechanism that allows you to position it to your liking.
  3. If you used threadlocker in the earlier steps, give it enough time to dry and set according to the manufacturer’s instructions.
  4. Once you are satisfied with the position and stability of the cup holder, take a short test ride to ensure that it does not interfere with your riding experience or obstruct any controls.
  5. During the test ride, pay attention to any vibrations or movement of the cup holder. If you notice any issues, re-tighten the mounting screws or bolts to address the problem.

After completing the final adjustments and testing, you are now ready to enjoy the convenience and functionality of your Kustom Kaddy Cup Holder on your Harley motorcycle. Whether you’re partaking in a long road trip or simply commuting to work, having your favorite beverage within easy reach enhances your riding experience.

 

Remember to regularly inspect your cup holder and ensure that it remains secure and in good condition. If you encounter any issues or need further assistance, refer back to the instruction manual provided by Kustom Kaddy Cup Holder or consult a professional if necessary.

 

Enjoy your rides and stay safe!

 

Conclusion

Congratulations! You have successfully installed the Kustom Kaddy Cup Holder on your Harley motorcycle. With this handy accessory, you can now enjoy the convenience of having your favorite beverage within easy reach during your rides.

 

Throughout the installation process, we went through the steps of preparing the cup holder and the motorcycle, mounting the cup holder bracket, attaching the cup holder itself, and making final adjustments and testing. By following these steps and using the recommended tools and materials, you have ensured a secure and functional installation.

 

It’s important to note that regular maintenance and inspections of your cup holder are essential to keep it in optimal condition. Check the mounting screws or bolts periodically to ensure they remain tight, and inspect the cup holder for any signs of wear or damage. Address any issues promptly to ensure safe and reliable use of your cup holder.

 

We hope this guide has been helpful in assisting you with the installation of your Kustom Kaddy Cup Holder. Remember to always ride responsibly, keeping your focus on the road while still enjoying the convenience that this accessory provides.

 

Now, get out there and enjoy your rides with your favorite beverage by your side!